Domus 3D Alternating Pressure Mattress & Digital Pump System

The Domus 3D is a pressure relieving mattress overlay and digital pump system designed predominantly for the community and home care environments. The Domus 3D can either be used as a complete mattress replacement system or by removing the 5" foam layer from the specially designed pocket underneath the mattress it alternatively be used as an overlay.  The Domus 3D comes with ventilated micro low air loss cells designed to help with air circulation within the mattress, to aid with infection control and patient comfort.The Domus 3D dynamic mattress system has a Digital pump for precise pressure control and visual-audible signals provide alarm and status notifications to alert caregiver/family.  The Domus 3D is a highly versatile and cost effective solution to pressure area care. Its modular construction makes it easy to keep clean and maintain, making it suitable for both the prevention and management of pressure ulcers.

Key features

• Simple to use and intuitive weight setting function
• Easy to set up
• Highly versatile
• Cost effective solution
• Modular construction
• Easy to keep clean and maintain
• For patients in medium to high risk of pressure injury
• Its ventilated low air loss cells & dual therapy mode can better aid in the prevention of pressure injuries for patient
• Static mode helps with all kinds of nursing care
• Alternating Therapeutic Mode:Continuously and sequentially inflates and deflates the air cells to allow for pressure redistribution over a ten minute cycle time. 
• Low Pressure Alarm:Alerts the caregiver if there is a loss of air pressure in the mattress. 
• Static Mode:Halts the alternating cycle of the mattress cells so that all cells inflate to the same pressure determined by the patient weight setting. This provides an even surface for the purposes of nursing procedures, after procedures or to act as a step down function before a patient is moved back onto a foam mattress.
• Mattress Cover:The cover is flame resistant to BS 7175 Crib 7 and has a host of features to aid with infection prevention including a 360 degree zip, white underside, vapour permeability, antimicrobial properties and is water resistant. The cover is four way stretch to offer greater pressure relief and comfort levels to the patient, it is also possible to launder the cover in a washing machine. 
• Ventilated Low Air Loss: The center cells are ventilated to increase air flow around the inside of the mattress to aid with patient comfort and infection control.
• CPR . The CPR toggle is located at the head end of the mattress and is designed to be highly visible in an emergency.
• Transport Mode Transport Mode is designed to be simple and easy to use. Its simple click in design also means it is robust and easy to keep clean.
• Air Cells The air cells modular design means maintenance, replacement and decontamination are easy to carry out. The center section of the mattress features Ventilated Micro Low Air Loss Cells, which are designed to aid air flow within the mattress to help with patient comfort and infection control.

Digital Pump Specification

• Dimensions 29 x 18.5 x 12.6 cm
• Weight 3 Kg
• Case Material Flame retardant ABS
• Supply Voltage AC 220 - 240V, 50Hz
• Operating Cycle 10 mins

Mattress Specification

• Mattress type 8" Replacement
• Dimensions 200 x 90 x 20.3 cm
• Alternating 1 - in - 2
• Cell Height 20 x 8"
• Weight 9 kg
• Cover Material 4-way Stretch PU / Polyester
• Cell Material Nylon / PU
• CPR Strap 2 Pieces
• Maximum Patient 250 kg
• Flame Retardant EN 597-1 & EN 597-2

Mattress Overlay Specification

• Mattress type Overlay
• Dimensions 200 x 90 x 12.7 cm
• Alternating 1 - in - 2
• Cell Height 17 x 4" / 5"
• Weight 6 kg
• Cover Material 4-way Stretch PU / Polyester
• Cell Material Nylon / PU
• CPR Strap 1 Piece
• Maximum Patient 200 kg
• Flame Retardant EN 597-1 & EN 597-2