UV-C Disinfection / Decontamination System

Product Code
UVM-344-MS
Instant UV-C decontamination system for Operating Theatres, Dental Clinics, Medical Practices, Care Homes and all Healthcare settings.UV-C irradiation is highly effective in inactivating and inhibiting SARS-CoV-2 replication. UV-C irradiat... read more
Price
£5,160.00 £4,300.00
Lead Time
Available to Pre Order - lead time approx 2 - 3 weeks
Free delivery on all orders over £250 Excl. Islands & Scottish Highlands
Any questions? Just Ask

Instant UV-C decontamination system for Operating Theatres, Dental Clinics, Medical Practices, Care Homes and all Healthcare settings.UV-C irradiation is highly effective in inactivating and inhibiting SARS-CoV-2 replication. UV-C irradiation is highly effective in inactivating and inhibiting SARS-CoV-2 replication and is significantly more efficient than using an air purifier. This system is future proof as it can be used currently in regards to Covid-19 but also in the future with other possible contaminations. It is fast and effective to use - it only take 4-5 minutes to complete its process - so less work for staff. This system is particularly suited to Operating Theatres, Care Homes, Medical Practices and Dental Clinics. Dental care frequently generates a strong aerosol, which is potentially infected with the new coronavirus. 

Key features

  • Powerful - The most powerful UV-C solution on the market. More than 36mJ/cm² over the whole Clinic surface.
  • Fast - Total COVID-19 decontamination of the air and surfaces of a 16m2 room is completed in 4 minutes.
  • Efficient - Our two mobile and light devices ensure the disabling of 99.99% of the viral load of COVID-19 in the aerosol
  • Secure - A unique complement to your barrier actions to ensure the safety of your patients while preserving your economic activity.
  • Particularly suited to Operating Theatres, Dental Clinics and all Healthcare settings. Dental care frequently generates a strong aerosol, which is potentially infected with the new coronavirus. 

What is the problem?

We know that infected patients can be carriers and therefore transmitters of the virus, without experiencing any symptoms. Covid-19 is transmitted by micro-droplets and saliva, either by direct or indirect projection. A dental aerosol can have a range of 6 meters and remain in suspension for 3 hours. This directly causes contamination of the air, soil and all surfaces. Covid-19 has been shown to have a high level of outdoor viability. The creation of the aerosol, and the associated 10 micron droplet cloud, therefore considerably increases the risk of contamination of you, your team and your patients.

What is the solution and how to quickly clean your surfaces

UV-C with a wavelength of 254nm, produced by the high power Amalgam lamps (172w), will be efficiently and quickly absorbed by the pathogen’s RNA to lead to its destruction.  The quartz tube that protects the lamps also filters the wavelengths at 200 nm that could produce ozone. Based on studies on adenoviruses, the manufacturers were able to conclude that a dose between 20 to 30 mJ / cm2 allows an efficient reduction of the Covid-19 coronavirus. The UVmastercare devices have been developed to allow you to use them safely thanks to a delayed ignition and 4 presence detectors integrated into the device.

Scientifically validated technology

Viruses of this type are more sensitive in the aerosol in suspension than on surfaces. In the aerosol, a dose of 2 milli-Joules / cm2 is sufficient, on surfaces it takes 35 mJ / cm2. These radiation doses being evaluated with a good safety margin.The effect of UV’s decreases with distance, and even with the square of the distance. So viral inactivation will depend on:

  • The number of lamps-the dimensions of the room
  • The spacing of the lamps between them (there is a zone between the lamps where their effects overlap)
  • Action time – the practitioner’s decision to decontaminate only the ambient air (very fast, often less than 2 minutes), or the air + surfaces (usually 3 to 5 minutes)

How does it work?

After your patient has left, you will perform routine surface disinfection: seat, cyalitic lamp, spittoons and instrument block before completely clearing the worktops. You will move the UVMaster172 near the chair and in the diagonal you will place the UVSlave172.   After connecting them, you will switch on the ignition. The green light will come on and the display will show you the programmed treatment time. You will push the key to start booting, the indicator turns orange and the 30 ”countdown is displayed and starts with an audible signal (repetitive beep). You will then leave the room you are closing. You can follow the progress of the disinfection using the remote control display which will signal the end of the treatment.

How to use this system

  • Routine disinfection: After the departure of your patient, you perform routine surface disinfection: Seat, operating light, spittoon and instrument block etc before completely clearing the worktops.
  • Positioning: You move the UVMaster172 near the chair and the UVSlave172 in the diagonal of the seat.
  • Plugging: After connecting the UVSlave172 to the UVMaster172 with a special cord, you can plug the UVMaster172 into a traditional electrical outlet. You then verify that the devices are properly powered.
  • Start up / Ignition of the system: You turn the ignition key to power the device (green light). If you are ready to leave the room, force the key to the right. The timer will start with an audible signal (one beep per second) and you have 30 seconds to leave the room.
  • Turn on and disinfection: If the presence detectors of the slave and the master do not detect movement in the room, the UV lights up successively. The treatment is started for the programmed duration. The motion detectors are activated. If an intrusion is detected, both devices are immediately stopped. You are directly informed via the remote control which emits an audible alert.
  • Ending of operating: During the processing, you are informed by wireless remote control of the count. The remote control is also equipped with a small red beacon to prevent access to the cabinet by placing it on the door or its doorframe. This remote control can also allow you to stop treatment at any time.

Once the disinfection is complete, the audible signal from the UVmaster172 and UVslave172 devices stops at the same time as the UVC lamps, the remote control light goes out and the display informs you of the success of the treatment.

Clinical Testing

In the downloads tab above, you can review work by Italian researchers which shows the effectiveness of UV-C for the elimination of the SARS-CoV-2 responsible for Covid19. The authors tested 3 fixed doses of UV-C on 3 concentrations of virus. To eliminate the dose encountered in the hospital in the sputum (mixture of mucus and saliva), 3.7 mJ / cm² was sufficient for 99.9% of destruction and our machine is much more powerful than that.  You can see information regarding the testing of the performance of this system in the downloads tab linked above.

What is included in your delivery?

  • Two mobile devices, each including a quartz-protected UVC tube (1 x UVMaster172w and 1 x UVSlave172w)
  • 1 x Remote Control
  • 1 x Patient Information Pack

This allows for the treatment of a standard room of 4 metres x 4 metres.


* The UVmastercare solution is suitable for rooms where the greatest floor length is 8 metres maximum. For larger rooms, please contact our team on 028 92 67 70 77 and we will help to define a tailor-made solution for your location.

Videos