Rain Canopy for Mobility Scooter Universal fit

Product Code
Please select an option.
The ScooterPac Universal Scooter Canopy has been designed to fit the vast majority of mobility scooters on the market including boot scooters. It folds away in seconds giving you the best of both worlds.  The canopy is light and quick a... read more
Price
£673.20 £561.00 with VAT relief What is VAT relief?

Maximum 20 characters (20 remaining)

Maximum 20 characters (20 remaining)

Free delivery on all orders over £250 Excl. Islands & Scottish Highlands
Any questions? Just Ask

The ScooterPac Universal Scooter Canopy has been designed to fit the vast majority of mobility scooters on the market including boot scooters. It folds away in seconds giving you the best of both worlds.  The canopy is light and quick and easy to fit. It means you can finally just go out whenever you want and the canopy folds out and back in just a few minutes.  It is robust and safe and is impervious to the elements so will not rust over time. The Scooterpac will add no more than 1meter 10 cm (110cm) to the height of the scooter measured from the square accessory bar at the back of the seat upwards. Providing that your scooter is fitted with both armrests as well as a box section accessory bracket at the rear of the seat, we almost guarantee that our mobility scooter canopy will fit.  The canopy comes in 2 sizes, Standard and XL to fit with a wide range of scooter models.  If you have any queries at all about compatibility with your scooter just call us on 028 9267 7077.

We offer an engineer accompanied fitting service in Northern Ireland, Scotland and the Midlands in England. We strongly recommend this service as the initial set up is a little tricky and best done by an abled bodied person with some basic engineering skills. If you decide to fit yourself and run into trouble we can try to assist by phone but we cannot assist in person unless a fitting service has been paid for.

Scooterpac is best when fitted to pavement and road scooters as these type of scooters are not intended to be lifted into the back of a car. Whilst Scooterpac will fit boot scooters too, we would point out that as boot scooters are intended to be easily stripped down and lifting into the boot of a car, when using Scooterpac it will take longer to dissassemble your scooter than normal and you will have to factor the additonal weight that Scooterpac will add when lifting into your car boot. If you don't intend dissassembling your boot scooter regularly than this is not an issue.  Scooterpac is still the best option on the market when it comes to boot scooters but worth considering these factors before you purchase.   

Click here to visit the manufacturer's site to check compatibility with your scooter.

Key features

  • Light yet strong aluminium frame
  • Hardwearing waterproof canvas roof
  • Clear polypropylene side windows
  • Hard, clear perspex front window
  • Choice of sizes
  • Fits most scooters with a box section accessory bracket

Specification

  • Open Height
    • Standard: 1200mm
    • XL:1200mm
  • Open Width
    • Standard: 600mm
    • XL: 600mm
  • Open Depth
    • Standard: 1150mm
    • XL: 1280mm
  • Folded Size
    • Standard: H830 x W630 x D180mm
    • XL: H960 x W630 x D180mm
  • Weight
    • Standard: 12kg
    • XL: 13 kg

Materials

  • Frame Material   Powder Coated Aluminium
  • Canopy Material Waterproof Nylon
  • Cover Material Waterproof Nylon
  • Window Material  Perspex
  • Maximum Wind Speed 40 mph

Please take time to review the image gallery to see the type of bracket required on the back of your scooter for this to be compatible.The bracket looks like this:

Videos