Robooter XZ Droid Smart Robotic Standing Frame

Robooter XZ-Droid Smart Standing Frame – Powered Mobility & Rehabilitation

Experience greater accessibility and new possibilities for everyday mobility with the Robooter XZ-Droid Smart Standing Frame, an innovative powered standing frame designed to combine personal mobility with supported standing and rehabilitation activities.

Developed by Robooter, the XZ-Droid Smart enables suitable users to move between a seated or supported position and a more upright standing posture, providing additional opportunities for everyday interaction, accessibility and rehabilitation. Unlike conventional electric standing frames that provide mobility exclusively in a seated position, the Robooter XZ-Droid Smart incorporates a specialist standing mechanism that can help users access higher surfaces, participate in standing activities and interact with others at eye level.

The standing frame is designed primarily for people with lower-limb disabilities who retain sufficient upper-body and trunk strength, including selected individuals with paraplegia below the T4 level. Its suitability must be established through a professional assessment, particularly for individuals with reduced bone density, joint deformities, pressure injuries or other conditions that may affect safe standing.

The XZ-Droid Smart is available in manual standing and electric standing configurations, allowing the standing mechanism to be selected according to individual requirements and the specification available. Powered mobility is provided by two 250W brushed motors, delivering a manufacturer-specified maximum speed of approximately 4.5km/h (2.8mph). A rechargeable lithium battery provides a maximum advertised driving range of approximately 15km (9.3 miles), depending on operating conditions. The standing frame also incorporates smartphone app remote-control functionality, enabling compatible remote operation and positioning in accordance with the manufacturer's instructions.

Its compact overall width of 520mm and approximate turning radius of 630mm make it suitable for consideration in indoor environments where manoeuvrability is important. Additional features include adjustable sizing, a low-centre-of-gravity design, stability-focused sensors and the ability to rotate within a compact turning area.

With its combination of powered mobility, supported standing and intelligent control features, the Robooter XZ-Droid Smart offers a specialist solution for appropriate home, clinical and rehabilitation environments. Available through John Preston, subject to UK supply confirmation, the XZ-Droid Smart is intended for customers seeking an advanced standing standing frame supported by professional assessment and individual fitting. Contact John Preston for further information, configuration options, pricing and suitability advice.

Key features

• Innovative Robooter XZ-Droid Smart Frame
• Combines powered mobility with supported standing
• Designed for appropriate rehabilitation and everyday mobility applications
• Choice of manual or electric standing configurations
• Squat-to-stand movement system
• Supports access to higher surfaces and everyday activities
• Allows interaction at a more upright eye level
• Designed for selected users with lower-limb disabilities
• Adjustable sizing to accommodate suitable users
• Manufacturer-listed user height range of 140–190cm
• Recommended user weight range of 40–100kg
• Dual 250W brushed drive motors
• Maximum speed of approximately 4.5km/h
• Maximum advertised range of approximately 15km
• Rechargeable ternary lithium battery
• Smartphone app remote-control capability
• Low-centre-of-gravity stability design
• High-precision sensors for stability-focused operation
• Compact 520mm overall width
• Approximate 630mm turning radius
• Maximum manufacturer-specified driving slope of 5°
• Approximate obstacle clearance of 40mm
• Compact design suitable for indoor environments only
• CE certification stated by manufacturer
• Specialist mobility and rehabilitation equipment
• Professional assessment required before use

What Is the Robooter XZ-Droid Smart?

The Robooter XZ-Droid Smart is a specialist standing frame that combines powered driving with a mechanism designed to support an upright posture. The system allows appropriately assessed users to participate in activities that may be more difficult from a conventional seated standing frame. These may include reaching higher work surfaces, engaging with people at eye level and undertaking prescribed standing activities.

The standing frame is intended for use as part of an individualised mobility or rehabilitation programme. Standing should only be undertaken where clinically appropriate and following professional assessment.

Supported Standing for Everyday Accessibility

One of the XZ-Droid Smart's principal features is its ability to support the user in an upright position. This can provide an alternative perspective and improve access to certain everyday environments.

• Access to suitable higher surfaces
• Greater flexibility during everyday activities
• Interaction with others at eye level
• Opportunities to participate in prescribed standing programmes
• Additional postural variety
• Potential support for personal independence

Squat-to-Stand Rehabilitation Function

The XZ-Droid Smart incorporates a squat-to-stand movement system. The manufacturer positions this feature as a solution for supporting rehabilitation activities involving the lower limbs and joints. The standing movement may be incorporated into professionally supervised programmes where appropriate.

• Supported standing activities
• Prescribed lower-limb movement programmes
• Joint movement and mobility exercises
• Standing tolerance programmes
• Functional activity practice
• Rehabilitation sessions guided by healthcare professionals

The manufacturer highlights circulation and joint movement as intended benefits. However, the standing frame should not be considered a substitute for physiotherapy, medical treatment or an individually prescribed rehabilitation programme.

Manual and Electric Standing Configurations

The Robooter XZ-Droid Smart is listed in two configurations.

XZ-Droid Smart – Manual Standing

The manual standing version incorporates a manually operated standing mechanism. Powered driving is still provided by the standing frame's electric motors. This configuration may be suitable where a manually operated standing function is appropriate following assessment.

XZ-Droid Smart – Electric Standing

The electric standing version provides electrically operated standing adjustment. This may be useful for users who require powered assistance to change between supported seated and standing positions.

Choosing the Right Configuration

The selection between manual and electric standing should consider:

• Individual strength and movement capability
• Trunk stability
• Standing tolerance
• Ability to operate the controls
• Postural support requirements
• Rehabilitation objectives
• Professional clinical recommendations

Arrange a demonstration with our product specialists to determine the best option.

Designed for Selected Users with Lower-Limb Disabilities

Robooter describes the XZ-Droid Smart as intended for suitable people with lower-limb disabilities, including selected individuals with paraplegia below the T4 level who retain good lumbar and back muscle strength.

Important Clinical Considerations

Professional guidance is particularly important for individuals with:

• Very low bone mineral density
• Severe joint deformities
• Pressure sores or unhealed pressure injuries
• Limited trunk control
• Reduced standing tolerance
• Other medical or postural concerns affecting safe standing

Adjustable Sizing

The XZ-Droid Smart incorporates adjustable sizing features intended to accommodate different users with an applicable height range of 140–190cm

User Weight Range up to 100kg

The manufacturer specifies an applicable user weight range of 40–100kg This is a specialist fitting range and should be considered alongside the user's height, strength, posture and standing requirements. 

Dual 250W Electric Motors

The XZ-Droid Smart is powered by two electric drive motors:: 2 × 250W brushed motors The motors provide powered mobility for everyday movement within the standing frame's operating limits.

• Supports movement without manual standing frame propulsion
• Enables suitable indoor mobility
• Provides controlled movement through powered drive
• Supports everyday accessibility
• Complements the standing function

Maximum Speed of Approximately 4.5km/h

The XZ-Droid Smart has a manufacturer-specified maximum speed of approximately 4.5km/h / 2.8mph This speed is intended for controlled powered movement. Users should always select a safe driving speed according to their environment and the manufacturer's operating guidance.

Up to 15km Driving Range

The Robooter XZ-Droid Smart provides a maximum advertised driving range of approximately 15km / 9.3 miles

Actual driving range may vary according to:

• User weight
• Terrain
• Driving speed
• Inclines
• Battery condition
• Temperature
• Frequency of stopping and starting
• Use of powered functions

Rechargeable Lithium Battery

The XZ-Droid Smart uses a rechargeable ternary lithium battery.

• Battery voltage: 24V
• Battery capacity: 15Ah
• Approximate charging time: 4–5 hours

Smartphone App Remote Control

The Robooter XZ-Droid Smart incorporates smart app remote-control functionality. This allows compatible control and positioning of the standing frame through a smartphone application.

• Convenient remote positioning
• Additional operating flexibility
• Smart standing frame functionality
• Modern connected mobility features

Remote operation should only be used in safe circumstances and in accordance with the manufacturer's instructions.

Low-Centre-of-Gravity Safety Design

The XZ-Droid Smart features a low-centre-of-gravity design intended to support stability. The manufacturer also highlights high-precision sensors and stability-focused technology. These features are particularly relevant to a standing frame incorporating a standing function.

• Low-centre-of-gravity construction
• High-precision sensors
• Stability-focused design
• Controlled powered movement

These features do not eliminate the risk of falls or tipping.

Compact 520mm Overall Width

The manufacturer specifies an overall width of approximately 520mm. This compact width makes the XZ-Droid Smart suitable for consideration in indoor environments where access space may be limited.

Approximate 630mm Turning Radius

The XZ-Droid Smart has a manufacturer-specified turning radius of approximately 630mm, this supports manoeuvrability in suitable confined spaces with full-spin rotation as a key feature.

Convenient Indoor Mobility

The XZ-Droid Smart is designed for use in appropriate indoor environments. Its powered drive system and compact dimensions allow it to be considered for everyday movement on suitable surfaces.

• Accessible homes
• Indoor public spaces
• Rehabilitation centres
• Suitable paved pathways
• Accessible community facilities
• Appropriate workplace environments

It is not a specialist off-road standing frame. Users should avoid unsuitable surfaces, excessive slopes and obstacles beyond the manufacturer's limits.

Maximum Driving Slope of 5°

The manufacturer specifies a maximum driving slope of 5° This is a technical operating limit rather than a recommendation to use the standing frame routinely on steep gradients. Slope suitability depends on the user's position, surface conditions and the manufacturer's instructions.

Obstacle Clearance of Approximately 40mm

The XZ-Droid Smart has an approximate maximum obstacle crossing height of 40mm / 4cm, this allows it to negotiate certain minor obstacles under suitable conditions. Users should avoid attempting unsuitable kerbs, steps or uneven surfaces.

Compact Overall Dimensions

• Length: 830mm
• Width: 520mm
• Height: 1,135–1,260mm

The adjustable height range reflects the standing frame's configuration.

Overall Weight of Approximately 85kg

The XZ-Droid Smart has a published overall weight of: 85kg ±3kg This is a specialist powered standing frame rather than a mobility scooter or powerchair. Its weight and dimensions should be considered when planning transportation, storage and installation. Suitable handling and vehicle loading arrangements may be required.

Specialist Rehabilitation Applications

The XZ-Droid Smart may be considered for use in appropriate rehabilitation programmes involving supported standing and functional mobility.

• Neurological rehabilitation
• Spinal injury rehabilitation
• Community rehabilitation
• Specialist mobility services
• Occupational therapy
• Physiotherapy
• Supported standing programmes
• Home-based rehabilitation

Everyday Benefits of a Standing Frame

• Access to Higher Surfaces: Standing can help users access suitable shelves, worktops and other elevated areas.
• Eye-Level Interaction: An upright posture may make conversations and social interaction more comfortable.
• Functional Activities: Standing may support participation in selected everyday tasks.
• Postural Variety: A supported standing position provides an alternative to prolonged sitting, where clinically appropriate.
• Rehabilitation Opportunities: The standing mechanism may form part of a prescribed rehabilitation programme.
• Smart Mobility: Powered driving and app control provide additional flexibility for everyday use.

Who Is the Robooter XZ-Droid Smart Suitable For?

The XZ-Droid Smart may be suitable for individuals who:

• Require powered mobility
• Have lower-limb disabilities
• Retain sufficient trunk and upper-body control
• Have been assessed as suitable for supported standing
• Need a specialist standing standing frame
• Would benefit from improved access to higher surfaces
• Are undertaking an appropriate rehabilitation programme
• Require adjustable standing equipment
• Can safely use the standing frame within its stated weight and height ranges

Suitability must be established by a qualified healthcare professional. We welcome joint assessments with clients and their OTs.

Available from John Preston

John Preston supplies a comprehensive range of specialist mobility equipment, powered standing frames and rehabilitation solutions designed to support independence and everyday accessibility. The Robooter XZ-Droid Smart Standing standing frame combines powered mobility with supported standing, intelligent control technology and a compact design. With manual and electric standing configurations, dual 250W motors, smart app control and a maximum advertised range of approximately 15km, the XZ-Droid Smart offers an innovative option for appropriately assessed users.