Netti III XHD Bariatric Wheelchair

The Netti III XHD Bariatric Wheelchair is a specialist manual wheelchair developed for bariatric users requiring enhanced seating support, pressure redistribution, and positional management. It is designed for individuals with complex clinical needs where standard wheelchairs may not provide sufficient stability or durability.

The wheelchair incorporates a reinforced frame and heavy-duty components to accommodate higher user weights, while maintaining safe and controlled manoeuvrability. The tilt-in-space function and reclining backrest enable effective repositioning, supporting pressure management and facilitating changes in posture throughout the day. These features are particularly beneficial for users at risk of pressure injury or those requiring assisted repositioning.

Key features

• Designed for bariatric users with complex seating and positioning needs
• Maximum user weight capacity up to 200 kg (31.5 stone)
• Reinforced frame, wheels, and structural components for heavy-duty use
• Tilt-in-space function (-9° to +16°) to assist with pressure redistribution
• Reclining backrest (approx. 86° to 133°) for postural adjustment
• Seat widths available up to 600 mm to accommodate wider users
• Pressure-relieving seat cushion with incontinence layer to support skin integrity
• Stabilising back cushion with lateral support to promote trunk positioning
• Adjustable and supportive leg rests to assist with lower limb positioning
• Compatible with dynamic seating components for users with involuntary movements

Specification

• Seat width: 500, 550, 600 mm
• Optional seat width flexibility: 2x -25 mm
• Seat depth: 400 - 500 mm
• Back height possibilities range: 500 - 600 mm
• Seat height range measured to seatplate: 450 - 475 mm
• Weight of wheelchair without cushions: 36 kg
• Max. load: 200kg/31st
• Max. load for car transport: 160kg/25st
• Tilt angle: -9° - +16°
• Recline angle: 86° - 133°
• Leg support length with standard leg support: 360 - 640 mm
• Width added to seat width with standard wheels: +240 / 12'' = +210 mm
• Total length with standard leg supports: 1020 mm
• Arm support height (from seatplate to armpad): 185 - 325 mm